ASTM E487-2014

化学材料恒温稳定性的测试方法

Standard Test Method for Constant-Temperature Stability of Chemical Materials

适用范围：This test method is a useful adjunct to dynamic thermal tests that are performed under conditions in which the sample temperature is increased continuously at a programmed rate. Results obtained under ...

发布日期：2014-03-01  实施日期：2014-03-01

ASTM D6186-2008

用压差扫描量热法（PDSC）测定润滑油氧化诱导时间的试验方法

Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

实施日期：2008-12-01

ASTM E2046-2008

用热分析测定反应诱导时间的试验方法

Standard Test Method for Reaction Induction Time by Thermal Analysis

实施日期：2008-04-01

ASTM D3418-2015

Standard Test Method For Transition Temperatures And Enthalpies Of Fusion And Crystallization Of Polymers By Differential Scanning Calorimetry

实施日期：2015-05-01

ASTM E1269-2011

用差动扫描量热法测定特殊热容量的试验方法

Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

适用范围：<p>Differential scanning calorimetric measurements provide a rapid, simple method for determining specific heat capacities of materials.</p> <p>Specific heat capacities are important for reactor and c...

实施日期：2011-04-01

ASTM E1782-2008

用热分析法测定蒸气压力的试验方法

Standard Test Method for Determining Vapor Pressure by Thermal Analysis

实施日期：2008-03-01

ASTM D3418-2008

用差示扫描量热法测定聚合物转变温度、熔化焓和结晶化的试验方法

STANDARD TEST METHOD FOR TRANSITION TEMPERATURES AND ENTHALPIES OF FUSION AND CRYSTALLIZATION OF POLYMERS BY DIFFERENTIAL SCANNING CALORIMETRY

实施日期：2008-11-01

ASTM E2070-2013

用等温差示扫描量热法测定动力参数的试验方法

Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

发布日期：2013-09-15  实施日期：2013-10-01

ASTM E2253-2011

温度和差示扫描量热法的热函测量结果的确认方法

Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters

适用范围：<p>This test method may be used to determine and validate the performance of a particular DSC apparatus.</p> <p>This test method may be used to determine and validate the performance of a particular me...

实施日期：2011-12-01

ASTM D6604-2000(2009)e1

用差示扫描量热法测定烃树脂玻璃化温度的规程

Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

适用范围：<p>Thermal analysis provides a rapid method for determining transition temperatures in HC resins that possess them.</p> <p>This practice is useful for both quality assurance and research.</p><p id=...

ASTM E968-2002(2008)

差分扫描量热仪热流量校准规程

Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters

实施日期：2002-03-10

ASTM E1356-2008(2014)

用差示扫描量热法测定玻璃化温度的试验方法

Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

发布日期：2014-03-15  实施日期：2014-03-15

ASTM E698-2011

热不稳定材料的阿累尼乌斯动力学常数的试验方法

Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

适用范围：<p>The Arrhenius parameters combined with the general rate law and the reaction enthalpy can be used for the determination of thermal explosion hazards <span class="bold">(1)</span><p id="s00002">1.1 T...

实施日期：2011-03-01

ASTM E2009-2008

用差示扫描量热法测定烃类氧化起始温度的试验方法

Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

实施日期：2008-09-01

ASTM D4419-1990(2010)

用差示扫描量热法测量石油蜡转变温度的试验方法

Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

实施日期：1990-05-24

ASTM D7426-2008(2013)

聚合体或弹性混合物Tg测定用DSC程序指定的试验方法

Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

发布日期：2013-11-01  实施日期：2013-11-01

ASTM D1519-1995(2014)

Standard Test Methods for Rubber Chemicals-Determination of Melting Range

实施日期：1995-09-10

ASTM D6580-2000(2009)

测定锌粉颜料和富锌涂料凝固膜中金属锌含量的试验方法

Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

适用范围：<p>This test method is useful for determining the amount of metallic zinc in zinc dust pigment, and also in dried films of both inorganic and organic zinc-rich coatings. Test Methods D 521<astmref rid=...

实施日期：2000-07-10

ASTM E2923-2013

用差示扫描量热法测定防火封堵材料寿命的规程

Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry

ASTM E1559-2009

太空船材料污染物除气性能的试验方法

Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials

适用范围：<p id="s00002">1.1 This test method covers a technique for generating data to characterize the kinetics of the release of outgassing products from materials. This technique will determine both the t...

实施日期：2009-04-01