NF E04-001-1-2012

Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification.

NF ISO/TS 17450-2-2004

Geometrical product specifications (GSP) - General concepts - Part 2 : basic tenets, specifications, operators and uncertainties.

实施日期：2004-11-01

JIS B 7522-2018

Textile tape measures

发布日期：2018-02-20  实施日期：2018-02-20

GB/T 16857.2-1997

坐标计量学 第2部分:坐标测量机的性能评定

实施日期：1998-01-01

GOST R 52028-2003

Nondestructive control. Measurement of rupture and corrosion by a superficial activation method

NF E01-012-2003

机械上的梭柱角度及棱形斜度

Geometrical Product Specifications (GPS) - Series of angles and sloppes on prisms.

GB/T 18779.1-2002

产品几何量技术规范（GPS）工件与测量设备的测量检验 第1部分：按规范检验合格或不合格的判定规则

Geometrical product specifications (GPS)--Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications

适用范围：本标准规定了按给定的(工件)公差限或(测量设备的)最大允许误差，并考虑其测量不确定度，检验工件或测量设备的特性合格或不合格的判定规则。　　本标准还规定了测量结果在不确定区(见3.23)内按规范判断合格或不合格的规则。　...

发布日期：2002-07-15  实施日期：2003-01-01

BS DD-CEN ISO/TS 17450-1-2007

Geometrical product specifications (GPS). General concepts. Model for geometrical specification and verification

GB/T 4096-2001

产品几何量技术规范(GPS)棱体的角度与斜度系列

Geometrical product specifications(GPS)--Series of angler and slopes on prisms

适用范围：本标准规定了一般用途棱体的角度和斜度系列。角度系列从120°～0°30ˊ，斜度系列从1：10～1：500。　　本标准适用于一般机械工程。

发布日期：2001-09-15  实施日期：2002-04-01

KS I ISO 3746-2016

Acoustics－Determination of sound power levels of noise sources using sound pressure－Survey method using an enveloping measurement surface over a reflecting plane

发布日期：2016-12-28  实施日期：2016-12-28

ISO 1-2016

Geometrical product specifications (GPS) -- Standard reference temperature for the specification of geometrical and dimensional properties

发布日期：2016-09-01  实施日期：2016-09-01

GOST 8.549-1986

ГСИ 500mm 以内的无公差直线尺寸测量的容许误差

The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances

BS EN ISO 2538-1-2014

产品几何技术规范(GPS) 楔子 角度和斜坡系列

Geometrical product specifications (GPS). Wedges. Series of angles and slopes

发布日期：2014-09-30  实施日期：2014-09-30

ISO 22432-2011

产品几何量技术规范(GPS) 规范中使用的特征和验证

Geometrical product specifications (GPS). Features utilized in specification and verification

适用范围：ISO 22432:2011 defines general terms and types of features for geometrical features of specifications for workpieces. These definitions are based on concepts developed in ISO/TS 17450-1. ISO 22432:2011...

实施日期：2011-11-08

ASTM D5826-2000

规格2至6X/7的儿童人体尺寸测量表

Standard Tables of Body Measurements for Children, Sizes 2 to 6x/7 (Withdrawn 2009)

JIS B 7514-1977

Steel straightedges

发布日期：1977-01-01  实施日期：1977-01-01

KS B ISO 14253-3-2005

Geometrical Product Specifications(GPS). Inspection by measurement of workpieces and measuring equipment. Part 3:Guidelines for achieving agreements on measurement uncertainty statements

发布日期：2005-12-30  实施日期：2005-12-30

GOST R 8.700-2010

State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope

实施日期：2010-11-01

NF ENV ISO 14253-2-2002

Geometrical Product Specification (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2 : guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification.

实施日期：2002-12-01

T/GDAQI 010-2019

激光式多功能电梯检测仪

Laser multi-function elevator testing instrument

适用范围：本标准适用于对电梯进行液压缓冲器复位时间、液压缓冲器最大压缩行程运行速度、制停减速度、制停距离检测时所用的电梯检测仪。

发布日期：2019-04-15  实施日期：2019-04-15