GOST 20502-1975

润滑油及其添加剂. 腐蚀性测定方法

Oils and additives to them. Methods for determination of corrodibility

KS MISO 6743-14-2003

Lubricants, industrial oils and related products(class L)－Classification－Part 14：Family U(Heat treatment)

KS M ISO 6743-99-2003(R2013)

Lubricants, industrial oils and related products (class L)－Classification－Part 99：General

发布日期：2003-09-23  实施日期：2003-09-23

NB/SH/T 0838-2010

未使用过的润滑油基础油及无沥青质石油馏分中稠环芳烃（PCA）含量的测定 二甲基亚砜萃取折光指数法

Determination of polycyclic aromatics(PCA) in unused lubricating base oils and asphaltene free petroleum fractions-Dimethyl sulphoxide extraction refractive index method

适用范围：1.1本标准适用于测定在标准大气压(101.3kPa)时，小于300℃馏分不超过5％(回收体积分数)的不含添加剂的未使用过的润滑油基础油的稠环芳烃(PCA)含量，PCA含量的测定范围为1％(质量分数)～15％(质量分数)。1.2本标准也可用于测定...

发布日期：2010-05-01  实施日期：2010-10-01

ASTM F2489-2006

仪器和精密轴承润滑剂指南 第2部分:润滑脂

Standard Guide for Instrument and Precision Bearing LubricantsPart 2 Greases

适用范围：<p>1.1 This guide is a tool to aid in the choice of lubricating grease for precision rolling element bearing applications. The recommendations in this guide are not intended for general purpose bearing...

实施日期：2006-05-01

DIN 51432-1992

废油的检验.水份和溶剂成份以及蒸馏残渣.蒸馏法

Testing of used oils; determination of the percentage of water, solvents and the distillation residue in used oil; distillation method

适用范围：The destillation method is used for the determination of the fraction of water, solvents and the destillation residue, determined as mass fraction in per cent, in used oils.#,,#

ASTM D2266-2001(2008)

润滑脂耐磨性能试验方法(四球法)

Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

适用范围：<p>The four-ball wear-test method can be used to determine the relative wear-preventing properties of greases under the test conditions and if the test conditions are changed the relative ratings may b...

实施日期：2001-12-10

NB/SH/T 0373-2013

铁道润滑脂(硬干油)

Railway grease

适用范围：本标准规定了铁道润滑脂(硬干油)的技术要求,检验规则,标志、包装、运输和贮存。本标准适用于蒸汽机车大轴及其他高速高压的摩擦副接触表面所使用的由脂肪酸钠皂稠化高黏度矿物油并添加少量极压添加剂而制得的铁路润滑脂(硬...

发布日期：2013-06-08  实施日期：2013-10-01

NB/SH/T 5001.2-2013

石化行业能源消耗统计指标及计算方法乙烯

Energy consumption statistics indices and calculation methods for ethylene plant in petrochemical industry

适用范围：本部分规定了乙烯装置能源消耗统计指标及计算方法。 本部分适用于以石油烃类为原料，经蒸汽热裂解、急冷、压缩、分离工艺，得到乙烯、丙烯等目的产品的乙烯装置所消耗能源的统计及计算。

发布日期：2013-06-08  实施日期：2013-10-01

DIN 51515-1-2001

汽轮机用润滑剂和调速液.第1部分:L-TD油的最低要求

Lubricants and governor fluids for steam turbines; L-TD lubricating oils and governor oils; minimum requirements

ASTM D5704-2010

评定人力操纵传动和主减速器驱动桥用润滑油热稳定性及氧化稳定性的试验方法

Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

适用范围：<p>This test method measures the tendency of automotive manual transmission and final drive lubricants to deteriorate under high-temperature conditions, resulting in thick oil, sludge, carbon and va...

实施日期：2010-05-01

DIN 51391-2-1994

润滑剂检验 润滑油中钡,钙和锌含量测定

Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)

发布日期：1994-03-01  实施日期：1994-03-01

ASTM D6709-2011

序列Ⅷ火花点火发动机（CLR油试验发动机）中汽车发动机油评定的试验方法

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

实施日期：2011-05-01

ASTM D5800-2008

用Noack法测定润滑油蒸发损失的试验方法

STANDART TEST METHOD FOR EVAPORATION LOSS OF LUBRICATING OILS BY THE NOACK METHOD

实施日期：2008-05-01

ASTM D2711-2001a(2007)e1

润滑油抗乳化性能试验方法

Standard Test Method for Demulsibility Characteristics of Lubricating Oils

BS 2000-179-1993(R2004)

石油和石油产品的试验方法.石蜡油的锥入度测定

Methods of test for Petroleum and its products Part 179. Determination of cone penetration of petrolatum [Use:IP 179/79]

实施日期：1993-02-28

SH/T 0350-1992(1998)

普通车辆齿轮油

发布日期：1992-05-20  实施日期：1992-05-20

ASTM D7450-2008

API类GL-5后轴齿轮润滑油性能规格

Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

实施日期：2008-05-01

ISO 13738-2011

润滑剂、工业润滑油和有关产品(L类) E组(内燃机油) 二冲程汽油机油规格(EGB、EGC、EGD)

Lubricants, industrial oils and related products (class L) -- Family E (Internal combustion engine oils) -- Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)

适用范围：ISO 13738:2011 specifies the requirements of lubricating oils (hereinafter referred to as "two-stroke oils") to be used in two-stroke-cycle spark-ignition gasoline engines which employ a crankcase scav...

发布日期：2011-07-01  实施日期：2011-07-01

ASTM D3707-1989(1999)

用烘箱试验法测定油包水乳液贮存稳定性的试验方法

Standard Test Method for Storage Stability of Water-In-Oil Emulsions by the Oven Test Method

实施日期：1989-10-27