BS ISO 3338-2-2013

铣刀直柄 削平型直柄的尺寸特性

Cylindrical shanks for milling cutters. Dimensional characteristics of flatted cylindrical shanks

发布日期：2013-08-31  实施日期：2013-08-31

DIN 1831-2-1990

镶刀片的三面刃铣刀 交货技术条件

Inserted tooth side and face milling cutters; technical delivery consitions

适用范围：The information on designation, dimensions, tolerances, material, design and marking included in the technical delivery conditions apply to side-and-face milling cutters with inserted cutting blades ac...

GOST 25334-1982

铣刀用光平面圆柱柄. 基本尺寸

Parallel flatted shanks for milling cutters. Basic dimensions

GB 6337-1986

模具铣刀技术条件

实施日期：1987-03-01

GB/T 9217.9-2005

硬质合金旋转锉第9部分：60。和90。圆锥形旋转锉(J型和K型)

Hardmetal burrs-Part 9:60°and 90°cone burrs(styles J and K)

适用范围：本部分规定了60°和90°的圆锥形硬质合金旋转锉的主要尺寸，并分别用符号J和K表示。　　切削直径的公差、螺旋槽方向和切削方向，圆柱形柄部的直径以及旋转锉的代号在GB/T 9217.1中已作了规定。

发布日期：2005-05-18  实施日期：2005-12-01

GB/T 17853-1999

不锈钢药芯焊丝

Stainless steel flux cored wires

适用范围：本标准规定了不锈钢药芯焊丝的型号分类、技术要求、试验方法、检验规则及缠绕、包装等内容。　　本标准适用于电弧焊不锈钢药芯焊丝及钨极惰性气体保护焊不锈钢药芯填充焊丝(以下简称焊丝)。这类焊丝芯部所含非金属组分应不小于...

发布日期：1999-09-03  实施日期：2000-03-01

KS BISO 3338-3-2003

Cylindrical shanks for milling cutters－Part 3：Dimensional characteristics of threaded shanks

GB/T 25992-2010

整体硬质合金和陶瓷直柄球头立铣刀 尺寸

Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions

适用范围：本标准规定了整体硬质合金和陶瓷直柄球头立铣刀的型式和尺寸，硬质合金和陶瓷材料按 GB / T 2075 的规定。

发布日期：2011-01-10  实施日期：2011-07-01

KS B3503-1997

扁头小螺丝用藏铣刀

Machine Screw Counterbores and Countersinks

ISO 1641-3-2003

端铣刀和槽铣刀 第3部分:有7/24锥柄铣刀

End mills and slot drills -- Part 3: Milling cutters with 7/24 taper shanks

适用范围：ISO 1641-3:2002 specifies the general dimensions of the following milling cutters with 7/24 taper shanks: end mills, flat-ended or ball-nosed -- standard series and long series (manual changers); slot ...

发布日期：2003-06-01  实施日期：2003-06-01

ISO 3860-2011

砂布键反转动孔铣刀 圆柱铣刀

Bore cutters with key drive -- Form milling cutters with constant profile

适用范围：ISO 3860:2011 specifies the dimensions of bore form milling cutters with a constant profile with key drive. It deals with the following three types of bore cutters with key drive: convex milling cutter...

发布日期：2011-05-01  实施日期：2011-05-01

NF ISO 22037-2007

Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions.

GB/T 6132-1993

铣刀和铣刀刀杆的互换尺寸

实施日期：1993-12-01

GB/T 14301-1993

整体硬质合金锯片铣刀

Solid carbide slitting cutters

实施日期：1993-12-01

BS ISO 3338-1-1996

铣刀的圆柱状柄.圆柱直柄的尺寸特性

Cylindrical shanks for milling cutters. Dimensional characteristics of plain cylindrical shanks

适用范围：This part of ISO 3338 specifies the dimensions of piain cylindrical shanks for milling cutters (of diameters 3 mm to 63 mm). It is applicable to both single-ended cutters and double-ended cutters. The ...

NF ISO 1641-1-2003

End mills and slot drills - Part 1: milling cutters with cylindrical shanks.

实施日期：2003-10-01

KS B3972-2002

超硬平铣刀

Plain milling cutter with cemented carbide tips

实施日期：2002-08-03

GOST 28435-1990

用机械方式固定多面硬质合金刀片的立式铣刀.基本尺寸

End mills with mechanically clamped indexable inserts. Basic dimensions

ISO 10911-2010

整体硬质合金圆柱柄立铣刀 尺寸

Solid hardmetal end mills with cylindrical shank -- Dimensions

适用范围：ISO 10911:2010 specifies the dimensions of solid hardmetal end mills with cylindrical shank.

发布日期：2010-03-01  实施日期：2010-03-01

ISO 6262-1-2013

End mills with indexable inserts -- Part 1: End mills with flatted cylindrical shank

发布日期：2013-09-01  实施日期：2013-09-01